• News
  • Home
  • JAY LENO!
  • Process
  • Gallery
  • Videos
  • Story
  • Contact
  • Tech.
  • Terms
 

new 7075t6 billet machined conrods

4/14/2014

2 Comments

 
Another new part that will be installed and tested in the current build. These were machined from high strength 7075t6 billet - 65,000psi yield strength, often used in aftermarket performance rods. I beam cross section area, height, flange width, all increased. Material added above small end. Shot peened after machining. Rod weight 320gms as shown, without big end. These are fitted with a heavy duty needle roller bearing, another experiment in the search for affordable alternatives to the stock floating bush.
Picture
2 Comments
Tapas link
6/18/2014 06:44:20 pm

Very beautiful work!

Reply
John from Iowa
11/3/2014 10:36:07 am

your parts are things of beauty. You could fame these and sell them as prints. No one can look at them and not recognise the quality of your work. Very well done my friend.

Reply

Your comment will be posted after it is approved.


Leave a Reply.

    Archives

    February 2020
    January 2019
    February 2018
    February 2017
    December 2016
    December 2015
    November 2015
    September 2015
    July 2015
    January 2015
    December 2014
    November 2014
    October 2014
    August 2014
    July 2014
    June 2014
    April 2014
    March 2014
    February 2014
    November 2013
    October 2013
    September 2013
    August 2013
    July 2013
    March 2013
    February 2013
    January 2013
    December 2012
    November 2012
    March 2012
    January 2012
    December 2011
    July 2011
    May 2011
    April 2011
    January 2011
    December 2010
    October 2010
    July 2010
    June 2010
    May 2010
    March 2010
    February 2010
    January 2010

    Author

     tappet dancer

    Categories

    All

    RSS Feed

Powered by Create your own unique website with customizable templates.